In standard, three grain chutes allow a precise, quick and flexibel unloading. For this use or when it's needed to only slightly open it, there are two control boxes at the back of the vehicle that allows to progressively make the floor move forward or backward.
The DRAKKAR can be fitted with rigid or hydraulic galvanized extensions. Thanks to the hydraulic system, you can choose to lift them or not, and the independent operating system on the left and right makes it easier to load with a harvester.
New hydraulic extensions on Drakkar
When loading low density material (for example : silage), thanks to these extensions, both the volume and the versatility of the machine are increased. When lowered, they make the loading operations easier with a loader and reduce the fall height of potatoes for example.
A transfer system can be mounted on the rear door of the DRAKKAR. Two augers, one that is horizontally placed over the whole width of the body and the other vertically, drive the matter at 450 t/h. A second door is provided to use the trailer without the auger.
The matter is brought by the moving floor to a first horizontal auger, which is placed on the whole width of the door and is driven by a hydraulic pump (50 l/min). This horizontal auger increases the capacity of the main transfer auger, which then brings the matter out of the trailer. It is driven by a hydraulic pump (150 l/min) but it is still possible to have the mechanical solution. The connection between the two parts is fully tight and the transported matters are not damaged.
For customers who mainly use the Drakkar to transport chopped materials like maize, grass, immature cereals or wood shavings, it is also possible to get a cover or rather a covering net. By simply pressing a button, the cover rolls up or unrolls and offers a simple and quick solution for the load safety.
Net-cover (type Flip-Tarp) with hydraulic opening
Folding sides with hydraulic control
The drop side is hydraulically driven and can be fitted on left or right side.
Available on the monocoque tipping trailers and multi-purpose trailers, this strong cover (690 g/m²) is fastened on a sub-frame that is bolted on the body and it is hydraulically controlled from the tractor. All handling works (climb, unwind, put straps, etc.) are now unnecessary. In short: more safety and a higher output!