Equipment available

Multi-purpose trailers

Management and Monitoring

Management and Monitoring
Electrohydraulic controls
Hydraulic distribution installation

Hydraulic distribution installation

The machines fitted with electrovalves gathered on a monoblock basis are protected by a galvanized box. This hydraulic distribution installation includes an inlet block (capacity: 60l/min or 120l/min). Most hydraulic functions of vehicles require a low flow but it is very important to know the functions that require a high one. For the functions requiring a high flow, there are two possibilities: a high-flow electro-hydraulic control and a flow deflector.

Drakkar control box

JOSKIN significantly improved the control box of the DRAKKAR multi-purpose trailer.
The new module allows to manage the unloading operation more precisely and works as follows:
• hydraulic opening/closing of the door;
• one single control to completely empty the machine;
• indicating the pressure in the circuits and starting the automatic unloading assistance if need be.

On triple-axle vehicles with some options, the control box also allows to control the following functions:
• lifting the first axle (Hydro-Tridem);
• adjusting the hydraulic running gear (Hydro-Tandem/Hydro-Tridem);
• adjusting the hydropneumatic hitching suspension;
• controlling the independent left/right hydraulic extensions;
• using the covering system.

This easy and solid box allows to control the whole machine.

Drakkar control box
Control box

Control box

The various standard hydro-valves and electro-valves (rear door, moving floor gear and inside box lighting) are operated by way of an easy-to-use control box made of aluminium.

Dynamic weighing system
Dynamic weighing system

Dynamic Weighing System on hydraulic suspension

Vehicles fitted with a hydraulic hitching suspension and a hydraulic running gear can be fitted with this device.

Two pressure sensors located on the hydraulic running gear circuit, as well as one on the hitching suspension, are connected to a computer on the running gear.

These sensors send cable signals so that the weight can be displayed on a screen in the tractor cabin. Another screen can be installed on a loader or on the vehicle in order to see the load weight at any time.

This system is also compatible with Isobus and can be controlled through the Isobus terminal that replaces in this case the separate screen. It is available on tipping trailers, muck and slurry spreaders, multi-purpose and silage trailers.