Equipment available

Silage trailers

Modular body

Modular body
Modular body

Mechanical drive by drive shafts

Mechanical drive by drive shafts
Hydraulic moving floor

Hydraulic moving floor

In order to ensure their sturdiness, the moving floors of the JOSKIN Silo-SPACE are standard made up of 2 moving parts with chains driven by 2 hydraulic motors with side box. Their profiled slats are alternately placed in order to ensure an even load distribution.

Yaw chains

The yaw chains offer a high resistance to traction. Two sets of 4 wearing-off rails in ertalon are placed on both sides of the body to prevent the moving floor and the bottom from scraping each other (silencing floor).

The two hydraulic motors (protected under the floor) that make the floor move are fitted with two gears: the first one makes it possible to set the moving floor in motion and increase its power while the second one allows to unload the silage trailer quickly and regularly.

Yaw chains
Upper cap

Upper cap

The system regulating the chain tension is protected by a wide opening cover (fastened by two gas cylinders) and a galvanized lower sheet (preventing foreign bodies from being projected in your silage). Nifty and practical cuts in this cover allow a quick detection of a lack of tension of one of the chains.

Silent-blocks

The mechanical angle transmission is protected by 2 anti-torsion silent-blocks absorbing the shocks turning up when starting to unload.

Silent-blocks
Shredding beaters

Shredding beaters

The shredding beaters allows a uniform unloading. They can be mechanically or hydraulically driven.

They can be mechanically or hydraulically driven.

Electromagnetic sensor

Once again, with a view on the user's safety and the equipment protection, an electromagnetic sensor indicates that the upper shredding beater is turning (700 rpm minimum) and allows the moving floor to be started. If the lower beater does not turn, the upper one will not be set in rotation, which explains the place where the sensor is mounted. This safety device, combined with the one on the rear door, prevents the silage matter from being unloaded against a still closed door or against the shredding beaters when they are not turning.

Electromagnetic sensor
Hydraulic headboard

Hydraulic headboard

The hydraulic headboard is standard mounted on the whole JOSKIN Silo-SPACE range and is particularly useful behind the forage harvester, when starting to work on a plot. The front wall is made of galvanized, punched steel sheet and guarantees a maximum visibility.

Door

The quick-opening side door turns out to be very useful for maintenance and cleaning operations. This equipment is mounted along with the "shredding beaters" option. A fold-away ladder makes the access easier.

Door
Lighting

Lighting

The inside box lighting (swivelling and well protected) is also part of the standard equipment of the JOSKIN silage trailers.

Extensions

Optional equipment of the JOSKIN silage trailers: The hydraulic side extensions in aluminium, left or right (height: 200 mm). The pre-equipment for side extensions is standard on the whole range. A rear steel extension (height: 200 mm) is also available as an option.

Extensions
Covering net

Covering net

Net-cover (type Flip-Tarp) with hydraulic opening for bodies 7500 to 9600

Duo-Cover

The Drakkar and the Silo-Space can be fitted with two covering nets (DUO-COVER). It is made up of two not-watertight covering nets on frames. The nets rest perfectly and with high resistance on the dome in order to transport without losses.

Duo-Cover