Equipment available

Silage trailers

Management and Monitoring

Management and Monitoring
Electrohydraulic controls
Hydraulic distribution installation

Hydraulic distribution installation

The machines fitted with electrovalves gathered on a monoblock basis are protected by a galvanized box. This hydraulic distribution installation includes an inlet block (capacity: 60l/min or 120l/min). Most hydraulic functions of vehicles require a low flow but it is very important to know the functions that require a high one. For the functions requiring a high flow, there are two possibilities: a high-flow electro-hydraulic control and a flow deflector.

Multi-functional control box

The multifunctional control box is the most ergonomic and efficient solution to easily operate the increasing number of hydraulic functions on agricultural machines. Thanks to this installation, it is possible to feed from 2 to 14 hydraulic functions, by means of one single hydraulic distributor on the tractor, via electrovalves. These electrovalves are controlled by means of one single control console in the cabin of the tractor, the multifunctional electro-hydraulic control box.

Multi-functional control box
Control box

Control box

The various standard hydro-valves and electro-valves (rear door, moving floor gear and inside box lighting) are operated by way of an easy-to-use control box made of aluminium.

Dynamic weighing system
Dynamic weighing system

Dynamic Weighing System on hydraulic suspension

Vehicles fitted with a hydraulic hitching suspension and a hydraulic running gear can be fitted with this device.

Two pressure sensors located on the hydraulic running gear circuit, as well as one on the hitching suspension, are connected to a computer on the running gear.

These sensors send cable signals so that the weight can be displayed on a screen in the tractor cabin. Another screen can be installed on a loader or on the vehicle in order to see the load weight at any time.

This system is also compatible with Isobus and can be controlled through the Isobus terminal that replaces in this case the separate screen. It is available on tipping trailers, muck and slurry spreaders, multi-purpose and silage trailers.