multiaction

Multi-Action

Specifications

Working width (m)

3,01 → 7,74

Type

Grass injector

Number of elements

7 → 18
General points

General points

The major advantage of the Multi-Action is its low weight. This injector combines modularity, simplicity of the construction and requires little maintenance.
Locking the elements for transport

Locking the elements for transport

Once the injector is folded, the elements which are situated on the upper arms are maintained in position by a locking system. A simple notch prevents each element from making a rotation round its axis and from falling down. The elements remain thus very rigid in relation to the vibrations due to transport.
Options

Options

  • Several options are available to complete the equipment of your Multi-ACTION, notably:
  • discs (Ø 250 x 3 mm) to be placed before the shares;
  • a covering harrow;
  • a mechanical or hydraulic side bumper.
Structure

Structure

The Multi-Action is made up of a single-beam frame carrying free steering elements fixed with a 21.5 cm spacing. The end of each of them, which is fully galvanized and made up of two arms with independent deflection, is fitted with a self-sharpening share followed by an injection cone.

The cutting share makes a groove in the ground (between 0 and 3 cm deep), while the injection cone smoothly and homogeneously lays down the slurry in the middle of this groove without splashing the plants.

The stay springs, combined to the springs serving as mechanical shock absorbers, only start working from a given operating height and allow to apply the shares on the ground with a given pressure. This ensures ground clearance for the frame and a flexibility in the deflection of the elements.

  • The long arms on which the shares are fixed allow:
  • • to ensure a great deflection up to 25 cm to compensate the ground unevenness;
  • • to avoid all vibrations on the elements, even at a speed higher than 10km/h;
  • • to ensure a regular slurry deposit on the ground without splashing.
General points

General points - Meadow injectors

Meadow injectors make it possible to inject slurry in the ground while avoiding damages to the surface dressing as much as possible.
They are mounted on identical galvanized frames. This standardization makes it possible to interchange the spreading elements.
These single-beam frames are made of high tensile steel offering the best compromise between strength and lightness.
The highly compact design and the folding system of the injector lead to a particularly limited overhang, which allows to significantly reduce the strains at the back of the slurry tanker.
Pincers

Pincers

JOSKIN injectors are standard fitted with mechanical anti-drip pincers that automatically release the injection pipe when the injection element hits the ground (and inversely when the element leaves it).

Each pincer is fitted with a rounded jaw and a pinching stop in order to limit the wear to the rubber injection cone as much as possible. They can be replaced by hydraulic pincers.
Free steering elements

Free steering elements

The injection elements are made up of 2 outlets and are fixed to the frame by means of an axis. They can pivot by 30° in bends (15° to the left and 15° to the right) without lifting the machine nor damaging the meadow.
Lock-Matic

Lock-Matic

Models that are more than 3 m wide are fitted with a double acting (DA) hydraulic folding system in order to respect the prescribed transport width.

In this case, the folding system is fitted with the Lock-Matic© automatic locking in order to enhance the driving safety as much as possible, namely on the road. This locking device is operated by the same hydraulic function as the folding system, thanks to the steered valves.
See more particularitiesSee more particularities
Specificities
Models

Pictures

Spreading tools
Spreading tools
Spreading tools
Spreading tools

Videos

multiaction
multiaction
joskin