pendislide

Pendislide

Specifications

Spreading width (m)

9 → 15

Type

Line spreading boom

Number of outlets

30 → 60
General points

General points

The Pendislide is a line spreading boom whose particularity is to be fitted with ertalon skids allowing the slurry to be applied more precisely on fields of growing plants, without dirtying them. Thanks to this system, the line spreading hoses perfectly follow the ground and ensure a homogeneous slurry distribution on the surface to be spread.
Options

Options

It is still possible to spread slurry in a traditional way (with an exact scatterer) without having to take off the boom.

It is possible to fit your PENDISLIDE with ball valves allowing to reduce the spreading width to 6 outlets by end and to 3 by wheel tracks.

The Section Pilot option also allows to adjust the working width.
Hydraulic folding

Hydraulic folding

All booms are fitted with a hydraulic folding system that has an insignificant overhang and that does not affect at all the driving of the carriage. During transport, the whole is fastened by a boom clipping system These has a height adjustment device and a craddle with a damping rubber.

  • The hydraulic folding system has the following specifications:
  • • hydraulic safety device;
  • • locking of the boom wings in transport position thanks to interlocking supports;
  • • diagonally positioned rams (not vertically) to better hold the boom in position (reduction of the swinging movement).
For a higher safety, the folded boom is such that the position of the macerators is pointed inwards so as not to exceed the boom size. From 18 m wide, a double folding system is required.
Macerator

Macerator

The macerator is of utmost importance in order to make sure the spreading implement works properly. 9 m booms have one single macerator, while those from 12 m have two of them in order to get a greater reactivity at the beginning of the spreading phase and to reduce load losses (slurry is more uniformly spread).
Twist and anti-drip systems

Twist and anti-drip systems

JOSKIN booms (except the TWINJET) are all standard fitted with the (double acting) anti-drip lifting device with Twist system.
It allows a transport in a very clean way thanks to the complete rotation of the line spreading hoses, which prevents any loss of slurry on the road as well as in the fields when manoeuvring.
JOSKIN line spreading booms are standard fitted with the Twist system allowing a 150° rotation of the boom.
  • Besides this anti-drip function, the Twist system has other advantages:
  • •it offers a limited overhang;
  • • it allows, as an option, to spread with an exact scatterer without having to take off the boom. The macerator and two manual or hydraulic valves just have to be added.
Anti-crash

Anti-crash

JOSKIN booms are all standard fitted with the anti-crash device that offer an extra safety when working on hilly ground. Every boom wing is fitted with springs and articulations that, when spreading on a bumpy ground, retract the ends of the boom (max. 55 cm) if it hits the ground. Mounting the wings at the end of the oblong holes allows them to pivot and makes it possible to adjust their height.
See more particularitiesSee more particularities
Specificities
Models

Pictures

Spreading tools
Spreading tools
Spreading tools
Spreading tools
Spreading tools
Spreading tools
Spreading tools

Videos

pendislide
pendislide
pendislide
pendislide
pendislide
joskin