Volume and Profitability for Your Silage Works

Silo-SPACE

Volume and Profitability for Your Silage Works

Specifications

Payload (t)

20 → 26

Axle(s)

Double axle
Triple axle

Range

Silage trailers
General points

General points

JOSKIN silage trailers are made up with a set of vertical posts supporting side and rear walls made of profiled sheets. This shaping increases the resistance of the side walls to the strains exerted by the silage matter. In order to avoid any risk of corrosion, the walls have a double protection (galvanization of the inner and outer sides, plastic paintwork on the outer side) and the bottom plate is fully galvanized.
Tapered body

Tapered body

The side and rear walls of our silage trailers are profiled in the unloading direction of the silage matter in order to unload while limiting friction strains. They are indeed 5 cm wider at the back in comparison to the front.
This tapered form allows a quick and easy unloading of of the silage matter (maize, grass,...).
Great rear door clearance

Great rear door clearance

The trailer is unloaded easily and without blocking thanks to the significant clearance (40 cm) of the rear door (operated by two double-acting rams) above the body. A locking device mounted on the spring makes sure the door is perfectly closed and avoids any unexpected opening during transportation.
Moving floor

Moving floor

In order to ensure their sturdiness, the moving floors of the JOSKIN Silo-SPACE are standard made up of 2 moving parts with chains driven by 2 hydraulic motors with side box. Their profiled slats are alternately placed in order to ensure an even load distribution. The yaw chains offer a high resistance to traction. Two sets of 4 wearing-off rails in ertalon are placed on both sides of the body to prevent the moving floor and the bottom from scraping each other (silencing floor). The two hydraulic motors (protected under the floor) that make the floor move are fitted with two gears: the first one makes it possible to set the moving floor in motion and increase its power while the second one allows to unload the silage trailer quickly and regularly.
Grip system

Grip system

The JOSKIN Silo-SPACE can be fitted, as an option, with a 3rd hydraulic point allowing to transfer some load on the front tractor axle, which considerably improves the carriage safety and the driving comfort in fields (hydropneumatic drawbar required).
Specificities
Specificities
Chassis
Width: 900 mm
Profiles : 300 x 100 x 6 mm
Body
Side and rear walls made of galvanized shaped steel sheets
Running Gear
• 20/40: bolted JOSKIN Roll-Over bogie with parabolic leaves
• 22/45 : Hydro-Tandem
• 24/45 et 26/45 : Hydro Tridem
Hitching
20/40 and 22/45 : drawbar with cross-springs
24/45 and 26/45 : hydropneumatic drawbar
Max. wheel dimensions
Ø 1.510 (mm) / Width 800 (mm)
Models

Customer testimonials

Question of Technique (Russia)

Calculate for how many years there have been working (almost 10 years) and they still look very nice!

Pictures

Silage trailers
Silage trailers
Silage trailers
Silage trailers
Silage trailers
Silage trailers

Videos

Silage trailers
Silage trailers
close
joskin