Equipment available

Spreading tools

Linkage

Linkage
Linkage

JOSKIN hitching systems are very compact in order to limit the side and vertical strains on the whole running gear. Made up of four points, they ensure a very high stability of the rear implement while reducing the overhanging part.

Several options are available on the linkages:
• The spring suspension allowing to take over a part of the load of the injector in order to avoid this one from sinking too deeply into wet and spongy grounds;
• An electric control at the back of the tanker making it easier to hitch the spreading implement;
• The connection of an exact scatterer through the linkage. Even with a rear implement, it is still possible to spread slurry traditionally thanks to the option "exact scatterer on injector".

Several options are available on the linkages:
- suspension for the linkage with springs or nitrogen accumulators;
- electric control of the linkage at the back of the tanker making it easier to hitch the spreading tool;
- connection of an exact scatterer through the linkage.

Even with a rear implement, it is still possible to spread slurry in the traditional way. The option "Exact scatterer on or through the linkage" has been designed for this purpose.

Integrated Lift linkage (linkage fully integrated to the chassis) on QUADRA, X-TREM, VOLUMETRA, tetrax and EUROLINER

The ‘‘Low-Lift’’ linkage does not take much place at the back of the tank thanks to its limited height. Designed for the quick coupling, CARGO Low-lift linkage is available on VACU-CARGO

The adjusting key of the upper tie rods is supplied with all JOSKIN linkages. The transport locks as well as the Walterscheid quick coupling are also part of the standard equipment.

Integrated Lift linkage in the tank on VOLUMETRA

Integrated Lift linkage in the tank on VOLUMETRA

L600 linkage on COBRA (fastened by 4 tapered shafts to make it a solid construction)

L1000 linkage on Modulo2

Structure of the vehicles

Provided the adequate (pre-)equipment is available, all JOSKIN slurry tankers (self-supporting ones or with chassis) can be fitted with a rear implement (except the ALPINA, Q-Bigliner, Tetraliner models).
Whatever the chassis width, it is always possible to fit a linkage on it. Indeed, the linkages are designed according to the existing chassis widths, either for traditional widths (1,000 mm for Komfort, Quadra and Euroliner) or for narrower widths (600 mm for Cobra).

Buttresses for self-supporting vehicles

Self-supporting vehicles can be fitted with the option "tank buttresses" that reinforces it over its whole height in such a way that the rear implement weight strains are transferred on the whole tanker. Spreading booms up to 18 m can be hitched to them, just like the Multi-Action injectors, the Solodisc injectors up to 6.02 m wide and the arable injectors with up to 11 tines.