solodisc

Solodisc

Specifications

Working width (m)

3,01 → 8,25

Type

Grass injector

Number of elements

14 → 44
General points

General points

The SOLODISC meadow injector is the ideal multi-functional implement for a highly precise spreading on your meadows. It is made up of discs with large diameter (406 mm x 19 mm), which makes it multi-functional both on meadows as on growing crops, stubble-fields, etc.
Structure

Structure

The Solodisc is made up of free steering elements that are fully galvanized and each fitted with a pair of discs, followed by a 2-position injection cone. The discs are placed at a distance of 21.5 cm from each other. As far as the injection cone is concerned, it is made up of a galvanized spout, an anti-drip pincer and a very flexible injection cone of profiled rubber.

The working depth can be adjusted (max. 6 cm) and is kept constant by means of the application of a constant pressure on the linkage. The pressure has simply to be modified, by means of an adjusting wheel, to adapt the working depth.

Besides, springs are used as mechanical shock absorbers and apply the discs with a given pressure on the ground, thereby limiting the injection depth variations and allowing a vertical deflection of the elements in order to adapt to the transverse ground unevenness (up to 25 cm). As an option, the springs can be replaced by a hydraulic cross-compensation system keeping the same ground pressure for each element (communicating vessels principle).
Discs

Discs

The Solodisc injector is also characterized by easily interchangeable discs. As a result, it is very easy to adapt the machine to your own needs. Self-sharpening discs (Ø 406 mm x 19 mm) are standard mounted on all machines. Made of cast steel, they are very resistant, and therefore everlasting. Another model is available as an option: Ø 300 x 3 mm with share. They allow to somewhat lighten the injector. They are combined to groove widening shares in order to keep a high spreading volume. The discs are mounted on hubs with (tightening) conical bearings, which are hermetically closed and over-dimensioned. Because of the resistance of the Ø 406 mm discs, the Solodisc requires less maintenance, even if it has been used for years.
Solodisc XXL

Solodisc XXL

This new injector is intended for large farms and contractors.

  • Advantages :
  • • up to 8.25 m wide ;
  • • 2 vertical beaters for a constant and homogeneous flow ;
  • • a new very sturdy frame ;
  • • spacing between the rows of 18.75 cm ;
  • • limited weight.
General points

General points - Meadow injectors

Meadow injectors make it possible to inject slurry in the ground while avoiding damages to the surface dressing as much as possible.
They are mounted on identical galvanized frames. This standardization makes it possible to interchange the spreading elements.
These single-beam frames are made of high tensile steel offering the best compromise between strength and lightness.
The highly compact design and the folding system of the injector lead to a particularly limited overhang, which allows to significantly reduce the strains at the back of the slurry tanker.
Pincers

Pincers

JOSKIN injectors are standard fitted with mechanical anti-drip pincers that automatically release the injection pipe when the injection element hits the ground (and inversely when the element leaves it).

Each pincer is fitted with a rounded jaw and a pinching stop in order to limit the wear to the rubber injection cone as much as possible. They can be replaced by hydraulic pincers.
Free steering elements

Free steering elements

The injection elements are made up of 2 outlets and are fixed to the frame by means of an axis. They can pivot by 30° in bends (15° to the left and 15° to the right) without lifting the machine nor damaging the meadow.
Lock-Matic

Lock-Matic

Models that are more than 3 m wide are fitted with a double acting (DA) hydraulic folding system in order to respect the prescribed transport width.

In this case, the folding system is fitted with the Lock-Matic© automatic locking in order to enhance the driving safety as much as possible, namely on the road. This locking device is operated by the same hydraulic function as the folding system, thanks to the steered valves.
See more particularities
Specificities
Models

Customer testimonials

Jens Breuer (Germany)

In order to reduce maintenance times to a minimum, I chose the central greasing system and thanks to the possible big wheels on X-Trem, the ground compaction is limited. The Solodisc slurry injector is characterized by its fully galvanized structure, its patented macerator, its constant ground pressure and its simplified management thanks to the Polymatic sequential block.

Neil Baxter (New Zealand)

I could choose from a wide range of options that were made available for me in order to get a slurry tanker that perfectly corresponds to the use i want to make of it.

Pictures

Spreading tools
Spreading tools
Spreading tools
Spreading tools
Spreading tools

Videos

solodisc
solodisc
solodisc
solodisc
solodisc
close
joskin