Working width (m)

2,80 → 7,20


Arable injector

Number of shares

7 → 13
General points

General points

The Terrasoc arable injector is fitted with rigid tines ended by flat duckfoot shares (24 cm wide) with a 40 cm spacing between them and a shear-bolt security. The shape of the tines and the wide serration of the shares prevent any clogging risks.

  • The advantages of this system are:
  • • an efficient soil ploughing;
  • • an injection depth ranging from 10 to 12 cm;
  • •an outstanding stubble ploughing (the share best suited to mechanical weeding);
  • • a smaller required tractor power (see here-after).


The Solodisc is made up of free steering elements that are fully galvanized and each fitted with a pair of discs, followed by a 2-position injection cone. The discs are placed at a distance of 21.5 cm from each other. As far as the injection cone is concerned, it is made up of a galvanized spout, an anti-drip pincer and a very flexible injection cone of profiled rubber.

The working depth can be adjusted (max. 6 cm) and is kept constant by means of the application of a constant pressure on the linkage. The pressure has simply to be modified, by means of an adjusting wheel, to adapt the working depth.

Besides, springs are used as mechanical shock absorbers and apply the discs with a given pressure on the ground, thereby limiting the injection depth variations and allowing a vertical deflection of the elements in order to adapt to the transverse ground unevenness (up to 25 cm). As an option, the springs can be replaced by a hydraulic cross-compensation system keeping the same ground pressure for each element (communicating vessels principle).
Stubble plough

Stubble plough

The injector is fitted with a support that can be hitched to the standardized 3-point linkage of a tractor. In this way, it can be used as a simple stubble plough or with an umbilical system.


The model 5200/13SH can be fitted with an extra pair of gauge wheels. This larger width ensures a more precise adjustment and a better stability when working on fields.


Arable injectors make it possible to inject slurry deeply. They also loosen the ground.

They are fastened on a galvanized double-beam frame reinforced by radiant crosspieces. The main advantage of this assembly is to focus the strains of the implement on the tanker, which then transfers them to the tractor. The stress is therefore reduced and the tank is not subjected to distortion.

The basic frame is modular for all models: large width models are manufactured on the basis of the 2.80 m models with extensions.

The frame of the injectors wider than 3 m are fitted with a double-acting hydraulic folding system with anti-twisting safety stop. All these implements are fitted with a road lighting system.
See more particularities


Spreading tools
Spreading tools
Spreading tools