Semi-mounted WAGO

Semi-mounted WAGO

Specifications

Length (m)

6 → 10

Axle(s)

Single axle
Double axle

Payload (t)

7 → 12
General points

General points

Another solution proposed by JOSKIN to transport straw is the semi-mounted WAGO agricultural bale trailer. Manufactured according to the same manufacturing principle as the trailed WAGO, the semi-mounted model is characterized by its available lengths: 6, 8 and 10 m. Furthermore, all axles are fitted with the hydraulic braking system. of 1,000 mm high (+ 800 mm available as an option) make it easier to transport bales. The floor in chequered plate is also fitted with a 4 cm side edge increasing the safety level during transport.
Reinforced rigid drawbar

Reinforced rigid drawbar

The Wago semi-mounted bale trailers are fitted with a reinforced rigid drawbar with two reinforcements welded on each side of the drawbar and on the chassis.
A lengthwise sprung drawbar is proposed as an option.
According to the model, this vehicle will be fitted with one single fixed axle or two rear axles with tandem suspension (standard).
Single-axle trailers are fitted with an adjustable manual stand and the double-axle ones with a hydraulic stand.
This semi-mounted WAGO bale trailer allows an easy and pleasant transport of straw on the fields.
Specificities
Specificities
Chassis
Width: 1.460 mm
Profiles :
• 200 x 100 x 8,5 mm
• ST10000D12 : 300 x 100 x 8.5 mm
Body
Wooden (40 mm thick) or 3/5 chequered plate with edges
Running Gear
Reinforced rigid drawbar
Max. wheel dimensions
Ø 930 (mm) / Width 440 (mm)
Models

Pictures

Bale trailers and low loaders
Bale trailers and low loaders
close
joskin