This website uses cookies to optimize your user experience. By navigating on this website, you consent to this use. To find out more about cookies, consult our privacy policy.

Equipment available

Transport Range - Silo-SPACE2

modular body


Hydraulic moving floor

In order to ensure their sturdiness, the moving floors of the JOSKIN Silo-SPACE are standard made up of 2 moving parts with chains driven by 2 hydraulic motors with side box. Their profiled slats are alternately placed in order to ensure an even load distribution.

Yaw chains

The yaw chains offer a high resistance to traction. Two sets of 4 wearing-off rails in ertalon are placed on both sides of the body to prevent the moving floor and the bottom from scraping each other (silencing floor).

The two hydraulic motors (protected under the floor) that make the floor move are fitted with two gears: the first one makes it possible to set the moving floor in motion and increase its power while the second one allows to unload the silage trailer quickly and regularly.

Upper cap

The system regulating the chain tension is protected by a wide opening cover (fastened by two gas cylinders) and a galvanized lower sheet (preventing foreign bodies from being projected in your silage). Nifty and practical cuts in this cover allow a quick detection of a lack of tension of one of the chains.

Silent-blocks

The mechanical angle transmission is protected by 2 anti-torsion silent-blocks absorbing the shocks turning up when starting to unload.

Shredding beaters

The shredding beaters allows a uniform unloading. They can be mechanically or hydraulically driven.

Electromagnetic sensor

Once again, with a view on the user's safety and the equipment protection, an electromagnetic sensor indicates that the upper shredding beater is turning (700 rpm minimum) and allows the moving floor to be started. If the lower beater does not turn, the upper one will not be set in rotation, which explains the place where the sensor is mounted. This safety device, combined with the one on the rear door, prevents the silage matter from being unloaded against a still closed door or against the shredding beaters when they are not turning.

Hydraulic headboard

The hydraulic headboard is standard mounted on the whole JOSKIN Silo-SPACE range and is particularly useful behind the forage harvester, when starting to work on a plot. The front wall is made of galvanized, punched steel sheet and guarantees a maximum visibility.

Door

The quick-opening side door turns out to be very useful for maintenance and cleaning operations. This equipment is mounted along with the "shredding beaters" option. A fold-away ladder makes the access easier.

Lighting

The inside box lighting (swivelling and well protected) is also part of the standard equipment of the JOSKIN silage trailers.

Extensions

As an option, hydraulic side extensions on the left or right side (250 or 400 mm high) and a rear steel extension (200 mm high) are also available.

Duo-Cover

The Drakkar and the Silo-Space can be fitted with two covering nets (DUO-COVER). It is made up of two not-watertight covering nets on frames. The nets rest perfectly and with high resistance on the dome in order to transport without losses.