This website uses cookies to optimize your user experience. By navigating on this website, you consent to this use. To find out more about cookies, consult our privacy policy.
solodisc xxl

Solodisc XXL

Specifications

Working width (m)

6,75 → 8,25

Type

Grass injector

Number of elements

18 → 22
General points

General points

The Solodisc XXL is an injector that is perfectly suitable for the largest areas: its working width can reach 8.25 m. The 18.75 cm between all elements ensure an efficient and homogeneous spreading in different situations (grass, growing crops, stubble-fields, etc.). The Solodisc XXL is fitted with a sturdy frame, vertical macerators and hydraulic pincers.
Structure

Structure

The Solodisc XXL is fitted with free steering elements all equipped with a pair of discs and injection cones made up of a spout, an anti-drip pincer and a very flexible profiled rubber cone.

Its working depth can be adjusted (max. 6 cm) by means of a handle and kept constant by applying a continuous pressure on the linkage.

Springs are used as mechanical shock absorbers and push the discs on the ground with a given pressure. Furthermore, they limit the injection depth variations and allow a vertical movement of each element of approx. 10 cm in order to face transverse ground unevenness.

As an option, these springs can be replaced by a hydraulic cross-compensation system keeping the same ground pressure for each element (communicating vessels principle) and transmitting 100% of the linkage pressure on a very hard ground.
Discs

Discs

The Solodisc injector is versatile since it is fitted with easily interchangeable discs. As a result, it is very easy to adapt the machine to your own needs. These 19 mm thick self-sharpening discs with a diameter of 400 mm are standard assembled on hubs with over-dimensioned watertight conical bearings (which can be tightened up).

Made up of metal, rubber and NBR nitrile, these discs are extremely sturdy and ensure a long lifespan to the Solodisc XXL.
Macerator

Macerator

The vertical macerators distribute the slurry evenly and minimize nitrogen emissions. Its cutting system with self-sharpening rotating blades is very efficient. Fitted with a system that reverses the rotation direction of the blades, it can cut and chop the biggest waste in order to prevent hose blockages and keep chopping.
Section Control

Section Control

As an option, the Solodisc XXL can be fitted with a basic kit for GPS section control.
Pincers

Pincers

The JOSKIN Solodisc XXL injectors are standard fitted with anti-drip pincers with hydraulic closing system. They automatically open the injection pipe as soon as the injector hits the ground (and inversely when the it leaves it). Each pincer is fitted with a rounded jaw and a pinching stop in order to limit the wear to the rubber injection cone as much as possible.
Free steering elements

Free steering elements

The injection elements are made up of 2 outlets and are fixed to the frame by means of an axis. They can pivot by 20° in bends (-10°/+10°) without lifting the machine nor damaging the meadow.
Lock-Matic

Lock-Matic

All models are fitted with a double-acting (DA) hydraulic folding system with Lock-Matic© automatic locking. These two devices are operated by the same hydraulic function, thanks to steered valves. They allow to comply with the regulatory provisions related to transport width and safety when driving on public roads.
See more particularities
Specificities
Models

Pictures

Spreading implements
Spreading implements

Videos

solodisc-xxl
close
joskin