Finalising your subscription

To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
Code
X Finalising your subscription

Use of cookies

This website uses cookies to optimize your user experience. By navigating on this website, you consent to this use. To find out more about cookies, consult our privacy policy.
pumping system: spiral pump

pumping system: spiral pump


The spiral pump uses the mechanical action of an eccentric screw to suck in and discharge the slurry. The rotation of the screw inside the stator then creates a series of hermetic chambers that move along the suction/discharge axis. The advantage of spiral pumps is that they only suck up until the liquid reaches their height (not like vacuum models to the highest point in the tank). They then send it to the tank or spreading implement. Sucking up and discharging thick slurry through long suction pipes become then possible. Storage lagoons over 3.5 m deep are emptied within a reasonable time. A 3-way valve allows, besides the filling and emptying functions, the mixing in closed circuit and the transfer from one pit to another one. All spiral pumps on JOSKIN vehicles are ergonomically and compactly positioned at the lowest point of the machine for an easy access and maintenance. The screw inside the pump is continuously immersed in the liquid to be transferred to reduce the risk of cavitation.

The spiral pumps on the JOSKIN slurry tankers are equipped with protection systems in the form of external or internal stone traps to prevent them from wearing out too quickly if they come into contact with foreign bodies. Regardless of their configuration, these devices are always equipped with a system to quickly remove stones and foreign bodies.

Unlike vacuum pumps, the slurry goes through the volumetric pumps and the flow rate mentioned here is the amount of liquid per minute. When used on slurry tankers, there could theoretically be an overflow. In order to avoid such a situation, an automatic filling stop system can be fitted. In this case, a signal from the float gauge gives the filling status and changes the position of the valves from "full" to "mixing in closed circuit". The pump then no longer sucks in slurry and does a mixing job.