This website uses cookies to optimize your user experience. By navigating on this website, you consent to this use. To find out more about cookies, consult our privacy policy.
Betimax RDS G6000

Betimax RDS G6000

Reclining livestock trailer with sprung drawbar
12.799 € Excl. VAT

More pictures See the equipment
  • Monocoque body with shaped steel sheets on 180 cm high, manufacturing in 4 mm high tensile steel. Dimensions: length 6.00 m x width 2.23 m x height 2.10 m
  • Tubular carrying chassis (180x100 mm)
  • Hot-dip galvanized chassis, drawbar and body. 2K industrial paint and finishing lacquer (total: 100 µ) on all the other parts
  • Livestock trailer designed for 8-10 animals (floor surface: 13,40 m²)
  • ADR 90 x 2066 – 8S (9 T/axle) axle and 400x80 hydraulic brakes
  • Spring drawbar (parabolic cross leaves)
  • Front access door on the right-hand side and full opening rear door with 2 independent leaves
  • Wheels Demolen 435/50R19.5 DM27 160 J (Ø 921 x 435 mm, 4,500 kg per wheel at 40 km/h)
  • Low hitching, JOSKIN Ø 50 mm flat eyelet
  • Pre-equipment for cover
  • Pre-equipment for inner partition or outer fences (on both sides)
  • Floor with 3-component resin and 2 Ø 2’’ drain caps (tightening/loosening key delivered)
  • Hydraulic body lowering (DA) with double safety valve Loading/unloading height: 14 cm
  • Protected electric lighting system
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (2442) LED lateral lights
EBR4S2 600

EBR4S2 600

Multi-Functional meadow aerator with hydraulic folding system
4.199 € Excl. VAT

More pictures See the equipment
  • Large working width (6 m)
  • Chassis with 3 sections (1.80 m + 2.40 m + 1.80 m) with hydraulic folding system (SA)
  • Automatic locking in transport position (unlocking by means of a cord from the cabin)
  • 4 rows of tools to face any type of damage:
  • 1 row of 60 cm leveling scrapers on half-flexible leaves
  • 1 row of 10 cm spreading paddles on very flexible leaves
  • 2 rows of flexible tines (Ø 7 mm)
  • Independent adjustment of the work intensity of every tool:
  • with the gauge wheels (scrapers)
  • through the length of the 3rd point (spreading paddles)
  • with a crank on pivoting point (flexible tines)
  • Quick hitching by Ø 28 mm round rod
  • 3rd point connected to the frame through a spring acting as a schock absorber and to maximize the contact with the soil
  • 2 pairs of steel wheels (Ø 360 x 100 mm)
  • Galvanized machine with mass produced standardized part. Structure and tools fully made of special steel. Shot-blasted and painted (2K) blades in treated steel
  • Easy maintenance and spare parts book delivered to make the replacement of wearing parts easier
  • 3- year warranty (see terms)
Trans-KTP 22/50

Trans-KTP 22/50

Construction tipping trailer with sprung drawbar
29.999 € Excl. VAT

More pictures See the equipment
  • Tapered monocoque body, in 6 mm HARDOX 450 special steel. Dimensions: 5.06 m - 5.28 m long, 2.18 m - 2.26 m wide, 0.95 m high
  • 900 mm chassis with 300 x 150 x 8 mm tubes covered with an industrial 2K paint and finishing lacquer (total: 100 µ)
  • Tipping trailer designed for a technical load of 22 T and a water volume of 10.90 m³ DIN (without extension)
  • Movable bolted rocker beam and adjustable bolted drawbar
  • Sprung drawbar (parabolic cross leaves) for maximum comfort and driving stability
  • BPW 150 x 1950 – 10S (15 T/axle) axles and double circuit 410x180 air brakes
  • Oil-fed tipping: 36 l hydraulic ram
  • Galvanized front ladder
  • Hydraulic skid (DA)
  • JOSKIN Ø 80 mm 3T knee-joint eyelet
  • 1-part hydraulic DA rear door (protected hydraulic rams)
  • Double truck-type lights on double oscillating frame
  • Hydraulically retractable rear bumper
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (396 x2) Wheels Alliance 650/55R26.5 167E TL 380 (Ø 1,360 x 645 mm, 6,000/7,900 kg per wheel at 40 km/h)
  • (424 x2) Thermoplastic mudguards
  • (628) Galvanized headboard
  • (1513) Movable bolted rocker beam
Siroko S4010/9V

Siroko S4010/9V

Muck spreader with sprung drawbar
20.499 € Excl. VAT

More pictures See the equipment
  • Narrow monocoque spreader with large wheels, manufactured in 550 high tensile steel
  • Designed for a technical load of 9 T and a manure volume of 8.41 m³. Required tractor power: max. 130 HP
  • Hot-dip galvanized chassis, drawbar and body. 2K industrial paint and finishing lacquer (total: 100 µ) on all other parts
  • Monocoque structure with bolted running gear (movable) and adjustable bolted drawbar
  • Sprung drawbar (parabolic cross leaves) for maximum comfort and driving stability
  • 2 vertical Ø 785 mm beaters in folded spirals (Total height: 1,750 mm)
  • Reversible and removable teeth in Hardox 450 steel (80 x 06 mm)
  • 1,000 rpm drive by Walterscheid P.T.O.-shaft with shear-bolt security (beaters rotation speed: 423 rpm)
  • Flexible couplings on the boxes
  • 2 Ø 14 mm shipping chains with manual tightener
  • Flow regulator with compensated pressure
  • Recessed lighting
  • Anti-projection headboard with grate
  • Outer access ladder
  • Hydraulic side stand (DA), JOSKIN Ø 50 mm bolted flat eyelet
  • ADR 100 x 2000 – 10S (13 T) axle and 400 x 80 hydraulic brakes
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (1995) Wheels Alliance 23.1x26 14 PR A347 156 A (Ø 1,590 x 590 mm, 4,000 kg per wheel at 40 km/h)
  • (1991) Hydraulic galvanized guillotine door (DA)
  • (1526) Lateral lights with LED bulbs
Modulo2 16.000MEB

Modulo2 16.000MEB

Slurry tanker with sprung drawbar
28.999 € Excl. VAT

More pictures See the equipment
  • Slurry tanker of 16,000 l, manufactured in special steel (55 kg) and fully galvanized (inside and outside)
  • Monocoque structure with bolted Roll-Over bogie (movable) and adjustable bolted drawbar
  • Sprung drawbar (parabolic cross leaves) for maximum comfort and driving stability
  • ADR 150 x 2000 – 10S (15 T/axle) axles and double circuit 420x180 air brakes
  • Hydraulic jack (SA)
  • Self-cleaning syphon 60 l/min
  • Galvanized exact scatterer
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (317) Air braking power in proportion to the load on level float gauge (154)
  • (4011x2) Wheels 650/55R26.5 (Alliance) 170 D 885 SB (Ø 1.380 x 648 mm, 8,160 kg per wheel at 40 km/h)
  • (074) Free steering axle with shock absorbers and hydraulic locking system (DA)
  • (603) Rear buttresses (pre-equipment for most JOSKIN spreading/injection implements)
  • (097) Pre-equipment for Ø 8’’ (200 mm) left/right Jumbo filling arm
  • (770) Pre-equipment for flashing beacon and working light (welded supports)
  • (1865) Pre-equipment for hydraulic door 500 x 600 mm - including pre-equipment for inner and outer ladders
  • (3096) Jurop PN130 vacuum pump (12,900 l/min): 540 rpm drive by Walterscheid P.T.O.-shaft, automatic lubrication, adjustable JOSKIN 6’’ overpressure valve (0-1 bar), self-cleaning syphon 60 l/min and 5 l can of Vacuum-Oil
  • (5361) JOSKIN Ø 50 mm bolted flat eyelet
TR/270/C3

TR/270/C3

Central rear rotary pasture topper
2.599 € Excl. VAT

More pictures See the equipment
  • Working width: 2.70 m; weight: 480 kg
  • Low required power: ideal for tractors of 45-85 HP
  • Industrial manufacturing in large series, continuous welds and industrial 2K painting with finishing lacquer (total: 100 µ)
  • Rear protection plate with pre-equipment for anti-projection chains
  • 3 cutting rotors with 2 retractable TD type blades (360° free rotation)
  • Triangularly positioned rotors with overlap possible of the different knives
  • Ø 330 mm galvanized disc to protect the blade holder on the central rotor
  • Floating hitching gear for a perfect contact with the soil
  • Rear hitching (in the middle), Ø 22 or 28 mm compatible and 300 mm offset possible
  • 2 extra wide skids (150 mm) in galvanized high tensile steel to fluidly glide even on holes
  • Adjustable cutting height on 6 positions (between 40 and 150 mm)
  • 540 rpm belt-driven rotors (Walterscheid P.T.O.-shaft)
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • 3-year warranty (see terms)
Trans-CAP 6500/22BC150

Trans-CAP 6500/22BC150

Grain tipping trailer with sprung drawbar
27.499 € Excl. VAT

More pictures See the equipment
  • Tapered monocoque body, in 4 mm 420 high tensile steel (floor). Dimensions: 6.39 m - 6.73 m long; 2.18 m - 2.26 m wide, 1.50 m high
  • 900 mm chassis with 300 x 100 x 8 mm tubes with industrial 2K paint and finishing lacquer (total: 100 µ)
  • Tipping trailer designed for a technical load of 18 T and a water volume of 21.90 m³ DIN (without extensions)
  • Bolted Roll-Over bogie (movable) and adjustable bolted drawbar
  • Sprung drawbar (parabolic cross leaves) for maximum comfort and driving stability
  • ADR 130 x 2000 – 10S axles and double circuit 406x120 air brakes
  • Oil-fed tipping: 33 l hydraulic ram
  • Tipping trailer with 4 front sight windows (21 cm x 63 cm) with protection rods
  • Galvanized front ladder and pre-equipment for cover and platform
  • Hydraulic side jack (DA)
  • 1-part hydraulic rear door (DA), 500x 500 mm grain chute and seal on the rear wall
  • Double truck-type lights on double oscillating frame
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (3785 x2) Wheels BKT 600/55R26.5 FL 630 Super Steel Belted 165 D TL (Ø 1,333 x 611 mm, 7,005 kg per wheel at 40 km/h)
  • (138) Braking system in proportion to the load on bogie
  • (074) Free steering axle with shock absorbers and hydraulic locking system (DA)
  • (1715) Pre-equipment for tipping stabilizer
  • (1389) Galvanized steel rods in addition to the perspex closing plates for the 4 front sight windows
  • (3751) LED flash bar connected on lighting
  • (1526) Lateral lights with LED bulbs
  • (5361) JOSKIN Ø 50 mm bolted flat eyelet
Scariflex R6S5 600

Scariflex R6S5 600

High-tech meadow aerator with 120 l seed drill
6.799 € Excl. VAT

More pictures See the equipment
  • Large working width (6 m)
  • Chassis with 3 sections (1.80 m + 2.40 m + 1.80 m) with hydraulic folding system (SA)
  • Automatic locking in transport position (unlocking by means of a cord from the cabin)
  • 6 rows of tools for an intensive and precise work:
  • 1 row of 60 cm leveling scrapers on half-flexible leaves
  • 5 rows of XXL flexible tines (Ø 8 mm)
  • Independent adjustment of the work intensity of every tool:
  • with the gauge wheels (scrapers)
  • with a lever on each element for the same angle on each flexible tine.
  • 3rd point connected to the frame through a spring acting as a schock absorber and to maximize the contact with the soil
  • 2 pairs of rubber gauge wheels (Ø 375 x 150 mm)
  • Galvanized machine with mass produced standardized parts. Structure and tools fully made of special steel. Shot-blasted and then painted (2K) blades in treated steel
  • Easy maintenance and spare parts book delivered to make the replacement of wearing parts easier
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (1636) 120 l pneumatic seeder (Delimbe): turbine with electric drive and "high flow" distributor (recommended for seeds of the grass and cereal type)
  • Galvanized distributors for maximum lifespan
 Tornado3 5011/11V

Tornado3 5011/11V

Muck spreader with sprung drawbar
28.599 € Excl. VAT

More pictures See the equipment
  • Narrow monocoque spreader with large wheels, manufactured in 550 high tensile steel and Hardox steel (protection plate for spreading table)
  • Designed for a technical load of 12 T and a manure volume of 12 m³. Required tractor power: min. 120 HP
  • 2K industrial paint and finishing lacquer (total: 100 µ)
  • Monocoque structure with bolted running gear (movable) and adjustable bolted drawbar
  • Sprung drawbar (parabolic cross leaves) for maximum comfort and driving stability
  • 2 vertical Ø 1,010 mm beaters in folded spirals (Total height: 1,770 mm)
  • Reversible and removable teeth in HB400 steel (80 x 12 mm)
  • 1,000 rpm drive by wide-angle Walterscheid P.T.O.-shaft with cam security (beaters rotation speed: 423 rpm)
  • 2 Ø 16 mm shipping chains with tightener and interchangeable bolted slats
  • Protected and retractable lights
  • Anti-projection headboard with grate
  • ADR 130 x 2100 – 10S (15 T) axle and double circuit 406x120 air brakes
  • Outer access ladder
  • Hydraulic skid (DA) on hand pump
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (2029) Wheels Russ 650/75R32 172 A8 DT 43 (Ø 1,785 x 645 mm, 6,300 kg per wheel at 40 km/h)
  • (1345) Hydraulic galvanized guillotine door (DA)
  • (1526) Lateral lights with LED bulbs
  • (WPTO25346) JOSKIN Ø 50 mm bolted flat eyelet
  • (3282) Ferti-CONTROL 300 control box (electric moving floor control with flow regulator, floor on/off switch and inversion of the moving floor direction)
Modulo2 11.000ME

Modulo2 11.000ME

Slurry tanker with sprung drawbar
18.999 € Excl. VAT

More pictures See the equipment
  • Slurry tanker of 11,000 l, manufactured in special steel (55 kg) and fully galvanized (inside and outside)
  • Monocoque structure with bolted running gear (movable) and adjustable bolted drawbar
  • Sprung drawbar (parabolic cross leaves) for maximum comfort and driving stability
  • ADR 150 x 2000 – 10S (15 T) axle and 420 x 180 air brakes
  • Hydraulic jack (SA)
  • 2" 1/2 indicators at the front and at the back of the tank
  • Self-cleaning syphon 30 l/min
  • Galvanized exact scatterer
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3-year warranty (conditions apply)
  • Included in this price:
  • (073) Double circuit air braking system in proportion to the load
  • (317) on level float gauge (154)
  • (568) Wheels Russ 800/65R32 (30.5R32) 176A8/169B DT44 (Ø 1,820 x 795 mm, 7,100 kg per wheel at 40 km/h)
  • (339) Jurop PN106 vacuum pump (10,000 l/min), automatic lubrication, 540 RPM drive by Walterscheid P.T.O.-shaft, 5 l can of Vacuum-Oil
  • (069) Wheel recessing in order to keep a low and compact vehicle even with wheels with a diam. > 1,601 mm
  • (603) Rear buttresses (pre-equipment for most JOSKIN spreading/injection implements)
  • (097) Pre-equipment for Ø 8’’ (200 mm) left/right Jumbo filling arm
Tetra-CAP 5025/15R120

Tetra-CAP 5025/15R120

3-way grain tipping trailer
14.899 € Excl. VAT

More pictures See the equipment
  • Body with fully removable drop sides, manufactured in 4 mm HLE special steel.
  • Dimensions: length 5.00 m x width 2.42 m x height 1.20 m (60+60)
  • Hot-dip galvanized chassis and drawbar. 2K industrial paint and finishing lacquer (total: 100 µ) on all the other parts
  • Tipping trailer designed for a technical load of 10 T and a water volume of 14.52 m³ DIN (without extension)
  • Running gear with spring leaves, industrial turntable and spring holding the drawbar
  • ADR 90 x 1850 – 10S (9 T/axle) axles and double circuit 350 x 60 air brakes
  • Tight seal all around the body
  • Galvanized front ladder and pre-equipment for cover and platform
  • Welded Ø 40 mm eyelet with wear ring
  • Central grain hatch (390 x 330 mm) with spout on rear drop side
  • Rear swivel yoke with complete connections for the lighting, braking system and tipping of a second trailer
  • Complete lightning system (including gauge lights)
  • Oil-fed tipping: 14 l hydraulic ram on double oscillating frame 3-way tipping system (side: max. 45°, back: max. 50°)
  • Thermoplastic mudguards, wheel chocks and rear bumper
  • Easy maintenance and cleaning. Machine delivered with its spare parts book to make the replacement of wearing parts easier
  • Industrial manufacturing in large series, continuous welds
  • 3 years of warranty (conditions apply)
  • Included in this price:
  • (3945 x2) Wheels Roadwing 385/65R22.5 WS767 160 K new (Ø 1,090 x 385 mm, 4,500 kg per wheel at 40 km/h)
  • (2400) Cover with arch and platform
Action with limited duration Action with limited duration
Payment at your dealer's<br>No online payment Payment at your dealer's
No online payment
Possibility to cancel the reservation Possibility to cancel the reservation
A question? A problem? A question? A problem?
+32(0) 4 377 35 45
×