Finalising your subscription

To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
Code
X Finalising your subscription

Use of cookies

This website uses cookies to optimize your user experience. By navigating on this website, you consent to this use. To find out more about cookies, consult our privacy policy.
Find out more
[A - Z]
ionicons-v5-a ionicons-v5-a
With a built-in filling arm, the opening angle between the tank and the first joint of the arm is max. 119°, while with a not built-in model, it is max. 132°. The arm is moved by means of a double-acting hydraulic ram with a long stroke. If the filling arm is equipped with a turbo-filler, it is installed at the joint between the 1st and 2nd elements.
The maximum angle of the second joint with a ball joint driven by a hydraulic ram is 95°, and with a ball joint driven by a hydraulic motor 180°. In addition, an "elbow" spacer allows this data to be adjusted and is the best solution when pumping in a container, from the top of an off-ground tank.
As an option, it is possible to equip your double filling arm with an adapter in order to suck on a funnel, like with the JUMBO arm.
JOSKIN currently offers 4 types of articulated filling arms: straight with or without turbo-filler, and angled with or without turbo-filler. These models are available with a diameter of 200 mm (8") or 250 mm (10"). Thanks to the two double-acting hydraulic joints, they can reach most slurry storage tanks. The JOSKIN articulated filling arms are available in self-supporting or built-in version. The choice of the built-in arm is often based on the diameter of the tank. It limits the overall dimensions and provides the necessary safety when driving on the road. As for the upper joint, there are 2 choices: either the standard ball joint driven by a hydraulic ram or the optional ball joint driven by a hydraulic motor. The main difference between the two is the opening angle of the arm that is much bigger with the hydraulic ball joint. For more reliability, all hydraulic pipes on the articulated arm are rigid hoses, and the watertightness between the arm and the tanker is ensured by a double-acting industrial valve. The filling arms can also be combined with an immersion pipe in the tank to discharge the slurry through the arm.

Articulated arms can be equipped with an optional 1m telescopic extension to easily pump into deep pits (+/- 4.5m). It is available with a diameter of 8" or 10".

The JOSKIN articulated arm on the tractor front linkage provides a compact, comfortable and versatile filling solution. With a pumping height of up to 4.5 m and a second arm section of 3 m long, it is possible to pump easily at the edge of the field from a slurry tanker, a transport tank, a container or an off-ground tank, provided they are equipped with a funnel. The double-acting hydraulic ram connecting the two parts of the arm controls the angle of the mobile part (max. 100°). Thanks to the front position of the arm, the driver has a very good view when filling.
Front JUMBO
Filling Arm

The front JUMBO is a hydraulically lowered filling arm mounted at the front of the tank. It can pump on the left or right with a quick and easy adjustment that requires no tools.

As an option, it is possible to equip your dorsal boom with an adapter for suction on a funnel, like with the JUMBO arm.

The advantage of the front-mounted dorsal boom is that it provides the driver with an excellent visibility while operating it. Available with a diameter of 200 mm (8") or 250 mm (10"), it can reach a maximum lifting angle for pumping into a container or an above-ground tank, and a maximum submersion angle for suction from an underground tank. The dorsal boom rotates 340° and is equipped with a safety switch. Once pumping is complete, it can be put back in its place manually or automatically via ISOBUS. It can be used with different types of pumps (vacuum, Vacu-Storm, lobe pumps) and is suitable for a wide range of suction conditions (lagoons, above-ground tank, on funnel, etc.).

As an option, it is possible to equip your dorsal boom with a turbo filler: it will be installed at the inlet of the tank, at the level of the last joint or at the end of the boom, and will thus be submerged in the slurry.
General Points
Filling Arm
In general, all filling arms manufactured by JOSKIN can be combined with an optional immersion pipe in the tank in order to work in both suction and pressure mode.
JUMBO (Funnels)
Filling Arm

Each machine fitted with a JUMBO filling arm is supplied with a funnel and its transport bracket, which is bolted to the side of the chassis or cradle. With the front JUMBO, JOSKIN offers two attractive options: a front-mounted bracket to reduce the overall dimensions and an electrically operated funnel with remote control, ideal for above-ground pits. The funnel is equipped with a valve that can be closed electrically to prevent slurry from flowing out when the pump is not in operation. The driver therefore no longer needs to get out of the cab to manually close the pit valve. This model is also equipped with a second electric valve to ensure that the slurry flows back to the pre-pit when the filling arm is vented. Finally, this funnel is equipped with a transport bracket (female part) designed for the tractor linkage.

JUMBO (Jumbomatic)
Filling Arm
The Jumbomatic is a sequential block fitted to JUMBO filling arms: a single double-acting function is enough to operate it. The block successively operates the various hydraulic functions: pump change-over, lifting/lowering the arm, transport safety, valve and air intake control. An electrical switch also isolates the "pump change-over" function; the vacuum is created in the tank while the arm is still in the vertical position, which is very convenient if you are using the tanker without the JUMBO arm, or if you already want to create a vacuum when leaving the field without having to move the filling arm from its transport position.
JUMBO (Principle)
Filling Arm

The JUMBO (Ø 200 mm) is a non-articulated, side-rotating filling arm that sucks up the slurry via a funnel to be connected to a storage tank (either underground or above ground) or the ground. It is a reasonable investment for eliminating the often tedious task of coupling the hoses, especially when a heavy Ø 200 mm hose is involved. The JUMBO can be equipped with a turbo-filler to speed up the filling process. The funnel and arm heads are movable to ensure a permanent tightness of the coupling when pumping.

Side JUMBO
Filling Arm

The side JUMBO is a hydraulically lowered filling arm mounted at the front right side of the tank for right-side suction only. Optionally, it can be placed on the front left side for left-side suction only.