Finalising your subscription
To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
X
![Finalising your subscription]()
On mobile water bowser
Not available on 1,100 and 2,100-l mobile tanks (standard on Aquatrans XL).
Not available on 1,100 and 2,100-l mobile tanks.
with European standards (3600, 4300, 5100, 6000 S and 7000 S models) for 80-90 cm high hitching.
ATTENTION: Ø 40 mm eyelet.
• Ø 1,076 to 1,250 mm
• Width: 390 to 568 mm
• Tyres from top brands
(B) Scharmüller Ø 40 mm flat eye (option)
(C) JOSKIN Ø 80 mm knee-joint eyelet (option)
(D) Joskin Ø 50 mm swivel eye (option)
For tractor without air brakes (European standard).
Only on high hitching.
Only on tandem and anti-fall safety on all RDS models.
Standard on 7.5 m and 9 m models. Optional on 5 m, 6 m and 6.75 m models.
On hydraulic brakes only.
Outside the perimeter of the tractor wheels, with 4 height adjustment options.
Standard on 5 m, 6 m and 6.75 m models.
Narrow drawbar for easy manoeuvring.
For greater power and ease of use.
Only on air brakes.
Sprung drawbar on RDS and adjustable slide with self‑lubricating ertalon.
Depending on the position of the container ring.
For adapting the suspension and angle of the drawbar and chassis.
According to the size of the wheels and the road width allowed by CE standards.
Of the hydraulic suspension.
Of the hydropneumatic drawbar suspension + sensor.
D10 and D14 models.
With manual locking above 15 km/h and whenreversing (standard on D22 and optional on D10, D14 and D18).
To limit wear on the road and increase the load on the tractor when needed.
2 or 3 positions depending on model.
(standard on D22, T22 and T30, optional on D18) for improved stability and maximal chassis angle, which increase the pullout force.
(D18, D22, T22 and T30 models - optional on D10 and D14). Optimal chassis angle for a higher pullout force and easier loading and unloading.
D10, D14 and D18 models.
Always active when driving forward and reversing, regardless of the speed (front and rear axles on T22 and T30, rear axle as an option on D18 and D22).
On Delta (optional on model 4525).
With 2 double-acting hydraulic cylinders and one nitrogen accumulator on Delta-SPACE.
On Delta-CAP (tandem) for enhanced traction on difficult terrain.
For work in difficult conditions.
For greater stability and less power required for traction (standard on 8600 and 9600, optional on 6600 and 7600).
2 positions front and rear.
With cross spring leaves.
With wide retractable skid inside the drawbar.
Withheight adjustment (standard on tridem, optional on tandem).
• Ø 1,172 to 1,523 mm
• Width: 543 to 810 mm
And many more!
Ideal for an easy height adjustment and to ensure the correct operation of the drawbar suspension.
With greasing points and adjustable by 4 pressure screws.
(A) Ø 80 mm 4 t knee-joint eyelet - 40 km/h (standard)
(B) Ø 80 mm 3 t knee-joint eyelet - 40 km/h with specific certificate for some tractor types (option)
(C) Ø 50 mm 3 t flat swivel eye (option)
On single-axle models.
With lubrication.
Large contact surface on the ground and fully retractable into the drawbar.
With silentblock suspension.
With hydraulic locking above 15 km/h and when reversing. Standard on double-axle models.
On Hydro-Tandem to increase the weight on the tractor during spreading (height-adjustable up to 25 cm).
Hydraulic axle suspension with 1,700 mm wheelbase – manual height-adjustment, automatic as an option.
Standard on models 7011/20BU and 7014/25BU
With 3 nitrogen accumulators for damping with laden and empty vehicle.
On 5511/15BU, 6011/17BU and 6511/18BU for enhanced traction on difficult terrain.
(for good turns with steering system)
(A) JOSKIN Ø 80 mm 4 t knee-joint eyelet (standard)
(B) JOSKIN Ø 50 mm flat swivel eye (option)
(C) JOSKIN Ø 80 mm 3 t knee-joint eyelet (option)
For discs and beaters.
Transport lift, end-of-line anti‑drip system and schok absorber
For quick uncoupling and stability when storing the machine.
With 4 stabilisation points (option no. 5469).
(Option no. 5418).
(Option no. 5480).
To the slurry tanker without folding on the tank.
For fast switching of implement and stability in parking areas.
Full LED lights.
With integrated compensation for follow-up of the ground and height limitation on the road.
For the double folding system.
For a perfect alignment of the extensions.
For models from 8.4 m working width.
For easy hitching to the tractor (3-point, category 2).
For maximum safety on the road.
For models up to 7.2 m working width.
Using multiple compensation cylinders and one or two central cylinders with graduated mark.
With loaded and empty vehicle (standard on tridem, optional on tandem).
(6 positions) according to the hitch height and wheel diameter.
Inside the drawbar, with wide skid.
With manual locking above 15 km/h and when reversing on 480D (self‑steering axle as an option).
To limit wear on the road and increase the load on the tractor when needed.
For greater stability and less traction power required.
Always active in forward and reverse gears, regardless of the speed (rear axle on 540D and front and rear axles on tridem) + optional electronic steering.
(A) Ø 80 mm 4 t knee-joint eyelet (standard)
(B) Ø 80 mm 3 t knee-joint eyelet (option)
(C) Ø 50 mm 4 t flat swivel eye (option)
With parabolic leaves.
Control of parking stand by double-acting hand pump (DA).
(A) Bolted Ø 50 mm flat eye (standard)
(B) Scharmüller Ø 40 mm flat eye (option)
(C) JOSKIN Ø 80 mm 3 t knee-joint eyelet (option)
(D) JOSKIN Ø 50 mm swivel eye (option)
Attached far under the body and centered in line with the axle: sturdiness and less resistance to traction.
4-point (3 height adjustments) and 3-point hitch (2 height adjustments).
With check valve and hydraulic pipes arranged neatly and securely
• Ø 850 to 1,250 mm
• Width: 356 to 568 mm
385/65R22.5 445/65R22.5 560/60R22.5
And many more!
on Tetra-CAP/SPACE for high flexibility and ease of use.
To transfer more load to the tractor.
Large contact surface on the ground and fully retractable into the drawbar.
With hydraulic locking.
On Hydro-Tandem to increase the weight on the tractor during spreading (adjustable up to 25 cm).
Hydraulic axle suspension with 1,700 mm wheelbase
- manual height-adjustment, automatic
as an option
For suspension via nitrogen accumulators when vehicle is loaded.
(A) JOSKIN Ø 80 mm 4 t knee-joint eyelet (standard)
(B) JOSKIN Ø 50 mm flat swivel eye (option)
(C) JOSKIN Ø 80 mm 3 t knee-joint eyelet (option)
For discs and beaters.
for frontmounted machine (standard on ATR).
(A) Hitch triangle (option).
And height-adjustment (2 positions).
With locking above 15 km/h and when reversing.
For double-axle models.
for high hitching with Y-shaped structure attached as close as possible to the axles to provide a natural traction line and reduce the power requirements.
For enhanced traction on difficult terrain.
Efficient self-steering axle when driving forward and reversing, whatever the driving speed.
Hydro-Tandem.
(A) Ø 50 mm swivel eye
(B) Ø 80 mm knee-joint eyelet
(C) Ø 50 mm flat eyelet (standard)
(D) Ø 40 mm fixed eyelet
For high or low hitch, with height adjustment (3, 4 and 5 t models).
with direct connection to the tractor and closing valve.
Adjustable in height (to fit large wheels) and depth (to adjust weight on tractor on single-axle trailer).
On double-axle models (wheels: max. Ø 945 mm).
Optional on bogie: braking power in proportion to the load (air brakes compulsory).
With 2 height adjustment options (7 and 9 t models).
With height adjustment, always perpendicular to the ground.
(A) Welded Ø 50 mm fixed eye (standard)
(B) Bolted Ø 50 mm fixed eye*
(C) Bolted Ø 50 mm swivel eye*
(D) Bolted Ø 40 mm fixed eye*
(E) Bolted Ø 80 mm knee-joint eyelet*
(F) Welded Ø 40 mm fixed eye (only high hitch)
*7 and 9 t models only.
(lighting, braking and tipping system of a second trailer) with swivel rear hitch.
And height-adjustment (2 positions) on Trans-KTP 17/22/27.
On Trans-KTP 24/31/34 (optional on 17/22/27).
With (A) or without (B) electrical plug.
(A) Bolted Ø 80 mm knee-joint eyelet (standard on 17/22/27)
(B) Integrated Ø 80 mm knee-joint eyelet (standard on 24/31/34)
(C) Bolted Ø 50 mm fixed eye
(D) Bolted Ø 50 mm swivel eye
For the lighting, braking and tipping system of a second trailer with swivel rear hitch.
When driving forward and reversing, whatever the driving speed.
With manual locking above 15 km/h and when reversing.
With heightadjustment (2 positions).
(A) Ø 50 mm swivel eye
(B) Ø 80 mm knee-joint eyelet (standard on 17)
(C) Ø 50 mm fixed eyelet (standard on 9/11/15)
(D) Ø 40 mm fixed eyelet
And height-adjustment (2 positions). Hydropneumatic
(hydraulic and air brakes)
To modify the load on the tractor.
For enhanced traction on difficult terrain.
(A) Ø 50 mm swivel eye
(B) Ø 80 mm knee-joint eyelet
(C) Ø 50 mm flat eyelet (standard)
(D) Ø 40 mm fixed eyelet
With hitching as close as possible to the axles to provide a natural traction line and reduce the power requirements.
Effective when driving forward and reversing at all speeds (1 self-steering axle as an option on 6500BC and 7000BC, standard on 7500).
Attached close to the axles to facilitate traction.
With wide base and total clearance inside the drawbar
(lighting, braking and tipping system of a second trailer) with swivel rear hitch.
With manual locking above 15 km/h and when reversing (tandem models).
(tridem) to limit wear on the road and increase the load on the tractor when needed.
Standard on 7500BC models, optional on 6500BC and 7000BC.
Triple-axle models.
With two nitrogen accumulators for a good suspension with the vehicle loaded and unloaded.
(models 6500BC and 7000BC) for enhanced traction on difficult terrain.
Hydro-Tandem/Tridem.
(A) Ø 80 mm 4 t knee-joint eyelet (standard)
(B) Ø 80 mm 3 t knee-joint eyelet
(C) Ø 50 mm flat swivel eye
With air brakes.
Galvanised WAGO.
Narrow drawbar with central parking stand on all semi-mounted bale trailers and low loaders.
Sprung drawbar with height adjustment.
Adjustable slide with self-lubricating ertalon for drawbar suspension.
(A) Ø 50 mm swivel eye
(B) Ø 80 mm knee-joint eyelet
(C) Ø 50 mm fixed eyelet (standard)
(D) Ø 40 mm fixed eyelet
On all WAGO-Loader.
On all 8 and 10 m trailed models with hydraulic or manual ramps.
