Finalising your subscription
To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
X
![Finalising your subscription]()
To secure the load on the road.
With a very large number of hooks on the side and rear drop sides to ensure a correct pressure on the seals.
Instead of swivel rear hitch.
With seal and built-in mechanical rods for a good protection.
Even with higher bodies.
• Ø 850 to 1,250 mm
• Width: 356 to 568 mm
That increase the compression between the drop side and the body, ensuring a perfect tightness.
Of the galvanised elements to prevent material build-up.
on Tetra‑SPACE and Delta‑CAP/SPACE (optional on Tetra-CAP).
Penditwist from 15 m and Pendislide PRO: safe positioning of the boom in the adjustable frame (B) of the tank by 2 hydraulic cylinders (A) + cone protection with flexible nylons (C) preventing vibration.
According to the user’s request.
Securely held in adjustable, curved passages to avoid cuts and vibrations.
At the macerator entrance.
to prevent slurry losses on the road and in the field when manoeuvring.
With a very large number of hooks on the side and rear drop sides to ensure a correct pressure on the seals.
With seal and built-in mechanical rods for a good protection.
That increase the compression between the drop side and the body, ensuring a perfect tightness.
For an easy management of the spare parts + stickers indicating the function.
Of the galvanised elements to prevent material build-up.
Avant pour faciliter la manipulation des ridelles (uniquement sur modèles 4525 et 5025).
All around the body for a perfect tightness.
(A) Body in ST420MC special steel (floor thickness: 4 mm).
(B) Core penetration of zinc in steel at 450°C.
(C) 70-micron galvanising with special treatment before and after immersion in the zinc bath.
To secure tipping.
(A) Body in ST420MC special steel (floor thickness: 4 mm).
(B) Automatic shot-blasting with 20 turbines (2,300 kg shot/min).
(C) 2K primer coat applied directly after blasting + flash-off before applying the finish.
(D) 2K topcoat with accelerated drying at 60°C.
With mud flaps on models 24/31/34.
Trans-KTP 17/22/27.
Trans-KTP 15 and 17.
With galvanised rods and transparent Plexiglas (on models 125).
In addition to Plexiglas for the 4 front sight windows (on models 125).
With arrows to indicate the correct stud tightening.
Before the door opens.
Ø 1,080 to 1,523 mm
Width: 390 to 795 mm
For models 125 (177 x 52 cm) and 150 (177 x 76 cm).
Or the 4 front sight windows (special for beets).
With (A) or without (B) electric plug for a 2nd trailer.
