Finalising your subscription
To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
X
![Finalising your subscription]()
Integrated in the tank to prevent water from sloshing during transport (from 3,600 l).
To limit splashing.
For all outer fences in transport position.
To prevent splashes and ensure a good protection for cyclists.
Thanks to low rear edges (5 cm) and 2 inner bars.
• HPA (350 to 600 t/h),
• SSN (30 to 110 t/h),
• ZSN (30 to 50 t/h).
To protect the front wall from dirt.
Only for 1,800 mm high bodies.
Thermoplastic front/rear and galvanised on the sides.
Visible from the tractor (supplied with a key).
Standard sur 8600 et 9600, option sur 6600 et 7600.
If larger wheels are fitted.
Of the upper body edges.
To improve the load-bearing capacity and reduce wear on the road.
For wheel nut tightening.
For locking the canopy in working position: 100% safety.
For the spreading blades under the hood.
For the moving floor slats passage, the underside of the body and the chassis.
With selflubricating material to limit manure adhesion.
All fitted so as to prevent clogging
To automatically lock the boom during road transport + guide cone.
(A) Male cone for locking the extensions on the road.
(B) Extension reception cone.
(C) Silentblock to prevent vibration.
(D) Mobile safety hook.
All fitted so as to prevent clogging.
(A) Injection hoses with adjustable locking to protect them from wear due to vibration.
(B) Flexible, rounded collar to hold and protect the hoses.
To automatically lock the boom during road transport + guide cone.
(A) Reception cone.
(B) Adjustable centering cone for locking the extensions on the road.
(C) Silentblock to prevent vibration.
(D) Mechanical safety device for locking the extensions on the road.
For a safe access to the air seeder.
Door centering lugs on the body + locking hooks.
To eliminate vibration and protect the bearings.
Ideal with night lighting.
Thermoplastic on the front/rear and galvanised on the top.
Well protected behind the body reinforcements to improve fluidity and increase longevity
At the front of the chassis to protect electrohydraulic and other components from stones, mud, etc. thrown up by the tractor wheels.
To close openings and prevent material build-up inside cavities.
CE safety
Mandatory for road traffic in some countries.
For easy replacement in case of wear.
With arrow indicator (visual safety).
To be bolted, 45 cm.
To protect the upper body edge.
Antivibration silentblock and perfect locking ofhydraulic extensions during road travel (C).
In notches to avoid stresses on the hinges.
For smooth, clog-free slurry flow.
Of the upper body edges.
For DPA (proportional flow) and audible safety alarm.
With arrow indicator (visual safety).
In 4 mm high tensile steel with welded wear rails in 6 mm high tensile steel.
With protective cone to prevent manure accumulation (standard on double-axle model).
For hydraulic and electrical lines.
Hydraulically opening protective grating of the beaters for safety on the road.
Mounted on two shock-absorbing cylinders, with plastic opening handle.
For models 125 (21 x 38 cm) and 150 (2 1x 63 cm).
For the 4 front sight windows.
At the back.
To secure the load.
