Finalising your subscription
To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
X
![Finalising your subscription]()
while complying with the regulations.
(2.18 m at the front and 2.26 m at the rear) to facilitate unloading.
with the cylinder in a forward position in the chassis to reduce the stress level.
(A) Side walls and floor in 4 mm thick high tensile steel.
(B) Automatic shot-blasting with 20 turbines (2,300 kg shot/min).
(C) 2K primer coat applied directly after blasting + flash-off before applying the finish.
(D) 2K topcoat with accelerated drying at 60°C.
For an easier use.
(1x250 mm or 2x250 mm).
For Roll-Over bogie.
On a double-oscillating frame with greased bearings.
