Finalising your subscription

To validate your subscription, please enter the 6-digit code that we have just sent you by e-mail.
Code
X Finalising your subscription
This website uses cookies to optimize your user experience. By navigating on this website, you consent to this use. To find out more about cookies, consult our privacy policy.

JOSKIN Pro Days – Edition 2023

principle


The arable injectors ensure that the slurry is injected deep into the soil, while at the same time they loosen the ground. They are designed on the basis of a double-beam frame reinforced by radiant crosspieces. The main advantage of this assembly is that it focuses the strains of the implement on the tanker, which then transfers them to the tractor. The stress is therefore reduced and the tank is not subjected to distortion. The frame is modular for all models: wide models are manufactured on the basis of the 2.8 m models with extensions. Versions over 3 m wide are equipped with a double-acting hydraulic folding system with an anti-torsion safety stop. All these implements are fitted with a certified road lighting system.

The injector has two standard hitch systems: one for the rear of a slurry tanker with a 4-point linkage and one for the standard 3-point linkage of a tractor. In this way, it can be used as a simple stubble cultivator (without injecting slurry), or even with an umbilical system.

The entire range of injectors can be used with an umbilical system (i.e. without a tank) since all implements can be fitted independently on our slurry tankers or on a specific support for the 3-point hitch of the tractor.

The meadow injectors inject the slurry into the ground while minimising the damages to its cover. They are assembled on the basis of the same galvanised frame. This standardisation allows an interchangeability of the injection elements. These single-beam frames are made of special high tensile steel offering the best compromise between strength and lightness. The ultra-compact design of the injector and the folding system result in a very low overhang, which significantly reduces the stress on the rear of the slurry tanker.

Models over 3 m wide are equipped with a double-acting hydraulic folding system in order to meet the required transport width. It should also be noted that this system is, in this case, equipped with the Lock-Matic© automatic locking device to make your road travel as safe as possible. This device is controlled by the same hydraulic function as the folding system, through steered valves.

Once the injector is folded, the elements on the upper arms are held in place by a locking system. A simple notch prevents them from rotating on their axis and falling back. The elements therefore remain very rigid with respect to the vibrations caused by transport.