This website uses cookies to optimize your user experience. By navigating on this website, you consent to this use. To find out more about cookies, consult our privacy policy.

Available equipment

Slurry tankers - ALPINA2 - management and monitoring


According to the chosen injector and sequential block, several hydraulic functions will be necessary.

If the macerator is operated by means of an electro-hydraulic box, a high flow entry block is then indispensable to increase the output of the hydraulic motor and prevent load losses and overheating problems.

Electrohydraulic controls

The machines fitted with electrovalves gathered on a monoblock basis are protected by a galvanized box. This hydraulic distribution installation includes an inlet block (capacity: 60l/min or 120l/min). Most hydraulic functions of vehicles require a low flow but it is very important to know the functions that require a high one. A high flow is especially needed for hydraulic motors, e.g. those of the turbo filler, macerator(s), etc. For the functions requiring a high flow, there are two possibilities: a high-flow electro-hydraulic control and a flow deflector.

The multifunctional control box is the most ergonomic and efficient solution to easily operate the increasing number of hydraulic functions on agricultural machines. Thanks to this installation, it is possible to feed from 2 to 14 hydraulic functions, by means of one single hydraulic distributor on the tractor, via electrovalves. These electrovalves are controlled by means of one single control console in the cabin of the tractor, the multifunctional electro-hydraulic control box.


The interface of the JOSKIN control box, just like that of the automaton, can be replaced by the ISOBUS terminal that is already present in the tractor cabin. If there is none yet, the JOSKIN terminal can be delivered.
The aim is to ensure the communication between different tractors and the many implements (and vice versa) through a standardized language. This international standard is ever more used and allows a quick and easy connection ("plug & play") between various brands.
The AUX-N feature allows to match any Isobus function with a compatible AUX-N Joystick. On top of making it easier to use, the AUX-N feature allows to select the functions associated to the Joystick.

Extra applications

Variable rate-control - Allows to process application maps in Shape format. Up to 5 different flow rates are possible. They are specified by means of maps with theoretical values. Applications are adapted in a specific way to the location, according to the regulations.

Track-Leader Top - Carries out an automatic guidance via the TRACK-LEADER functions. Besides the App, the system includes an extra guidance computer and a GPS-receiver. The automatic guidance relieves the driver, increases the yield performance per surface and reduces the diesel consumption.

Track-Leader - Allows to have parallel tracks with different driving modes. The guiding direction and the bypass force are displayed on the screen. The software also gives information about the spread area and writes the tracks and field edges to memory.

Section-Control - Allows the automatic activation and deactivation of the machines and an automatic partial width change. As soon as a section spreads party of totally on an already spread area, it is deactivated.

Available terminals

• 10,4'' screen
• Touch screen
• Multigraphic window
• Video input

• 12,1'' screen
• Touch screen
• Multigraphic window
• Video input

Optional Accessories



ISOBUS joystick

Determine your management mode according to your needs

Functions Tools Flow meter Possible management
Single axle Single / / Direct conn. to tractor
Many / /
Double axle Many yes / + sequential block
+ ()
Many yes yes + ()